Hemp Oil Finish
This is a natural food safe oil finish containing no solvents. It is very easy to use and apply, making finishing your projects a breeze! It provides a protective, water-resistant surface. You can use it on bare wood to bring out the natural colours and patina for a beautiful authentic finish, or Milk-painted or painted surfaces for protection. Can also be used on New wood or stained wood. It penetrates to protect from the inside out. It does not leave a surface film that will chip or scratch. Test on an inconspicuous spot prior to using on an entire piece.
This oil is a great environmentally friendly product as the hemp seeds are grown without the use of herbicides or pesticides.
Coverage:
250 ml – Covers approx 40 square feet
500 ml – Covers approx 80 square feet
1 Litre – Covers approx 160 square feet
1 Gallon – Covers approx 600 square feet
5 Gallons – Covers approx 3000 square feet
• Food Safe
• No Chemicals
• NO VOC’s
• Breathable
• Biodegradable
• 100% Natural Hempseed
Coverage will vary taking into consideration what the oil is being applied to. For example, a previously oiled surface will require very little oil, where bare wood will require more.
How to use this product:
Apply a small amount of oil to surface using a brush or clean cloth. Rub gently until it is absorbed into raw wood or Milk Paint finish. For additional sheen and protection, add 2-4 coats. With no solvents, drying time is extended, so allow 2 hours between coats and wipe away excess after 12 hours. Finished piece may take several days to cure. To maintain, apply a light coat whenever desired, or the surface is looking dull and dry. To remove scratches, lightly sand blemish, then reapply oil. To clean your brush simply use soap and water.